Application of intramolecular 1,3-dipolar cyclic addition of azide and olefin; construction of (pyrrolidine-2-ylidene)glycinate and glycinamides

Oxopropyl E-(pyrrolidine-2-ylidene)glycinamide (5c) and allyl E-(pyrrolidine-2-ylidene)glycinate (5d) were effectively synthesized from 2,3,5-tri-O-benzyl-4-O-tert-butyldimethylsilyl(TBDMS)-D-arabinal (7) using intramolecular 1,3-dipolar cyclic reaction of azide and olefin as a key reaction. These results proved this cyclic reaction should be applicable for the synthesis of various (pyrrolidine-2-ylidene)glycinate and glycinamide. In addition, the development of a synthetic route for the precursor of an unsaturated cyclic dehydro amino acid involved in azinomycins (carzinophilin) using relating glycinate, methyl E-(pyrrolidine-2-ylidene)glycinate (5a) was described.     

Asymmetric cyclization of 2-alkenylphenols. A comparative study on the use of palladium(II) and titanium(IV) complexes

The oxidative cyclization of 2-(3-pentenyl)phenol catalyzed by [(η³-pinene)PdOAc]₂ gives optically active (+)-2-vinylchroman (25% e.e.), while (−)-2-(1-hydroxyethyl)chroman (56% e.e.) is formed as a single diastereomer upon treatment with t-BuOOH in the presence of Ti(OⁱPr)₄ and -(+)-diethyl tartrate. 2-(2-Butenyl)phenol also undergoes the Ti-promoted asymmetric cyclization to give (2S,1′R)-(−)-2-(1-hydroxyethyl)-2,3-dihydrobenzofuran (29% e.e.).     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

An atropisomeric M2L4 cage mixture displaying guest-induced convergence and strong guest emission in water

Introduction of atropisomeric axes into a bent bispyridine ligand leads to the quantitative formation of a complex mixture of atropisomeric M₂L₄ cages upon treatment with metal ions. Whereas the isomer ratio of the obtained cage mixture, consisting of up to 42 isomers, is insensitive to temperature and solvent, the quantitative convergence from the mixture to a single isomer is accomplished upon encapsulation of a large spherical guest, namely fullerene C₆₀. The observed isomerization with other guests depends largely on their size and shape (e.g., <10 and 82% convergence with planar triphenylene and bowl-shaped corannulene guests, respectively). Besides the unusual guest-induced convergence, the present cage mixture displays the strongest guest emission (Φ_F = 68%) among previously reported M_nL_m cages and capsules, upon encapsulation of a BODIPY dye in water.

A complex mixture of atropisomeric M₂L₄ cages is shown to undergo perfect convergence to a single isomer upon encapsulation of spherical C₆₀ in water. Moreover, the cage mixture displays very strong guest emission upon encapsulation of a BODIPY dye.     

Control of viscoelasticity using redox reaction

The viscoelasticity of a fluid was tuned with the Faradaic reaction of (11-ferrocenylundecyl)trimethylammonium bromide (FTMA), a "redox-switchable" surfactant. An aqueous solution of the reduced form of FTMA exhibited a remarkable viscoelasticity in the presence of sodium salicylate (NaSal) because of the formation of three-dimensional entanglement of wormlike micelles. Electrolytic oxidation of FTMA caused the viscosity of the system to dramatically decrease and the elasticity to disappear. This drastic decrease in viscoelasticity arose from the disruption of wormlike micelles. This novel electrorheological phenomenon is expected to be applicable to ink for inkjet printers, the electrochemically controlled release of substances entrapped in wormlike micelles of FTMA, and fluid flow rate control using electric signals.     

Effect of mono-CDNP substitution of lysine residues on the redox reaction of cytochrome c electrostatically adsorbed on a mercaptoheptanoic acid modified Au(111) surface

The effect of charge-inverting modification of single surface lysine residue on the electron transfer (ET) reaction of horse heart cytochrome c (cyt c) is examined for 12 different types of mono-4-chloro-2,5-dinitrobenzoic acid substituted cyt c (mCDNPc) adsorbed on a Au(111) electrode modified with a self-assembled monolayer (SAM) of 7-mercapto-heptanoic acid (MHA). A negative shift in the redox potential by 10-35 mV as compared to that of native cyt c and a monolayer coverage in the range of 13-17 pmol cm(-2) are observed for electroactive mCDNPc's. The magnitude of the decrease in the ET rate constant (k(et)) of mCDNPc's compared with that of native cyt c depends on the position of the CDNP substitution. For mCDNPc's in which the modified lysine residue is outside of the interaction domain of cyt c with the SAM, the ratio of the k(et) of mCDNPc to that of native cyt c is correlated to the change in the dipole moment vector of cyt c due to the CDNP modification. This correlation suggests that the dipole moment of cyt c determines its orientation of adsorption on the SAM of MHA and significantly affects the rate of the ET. The CDNP modification of lysine residues at the interaction domain significantly decreases the rate, demonstrating the importance of the local charge environment in determining the rate of ET.     

Ca0.8Y2.4Sn0.8O6, a quaternary oxide with mixed occupations of Ca/Y and Y/Sn

A new quaternary oxide, calcium yttrium stannate, Ca_0.8Y_2.4Sn_0.8O₆, is isostructural with Mg₃TeO₆ (trigonal, R). The empirical formula can be expressed as (Ca_0.2667Y_0.7333)₆(Y_0.4Sn_0.6)SnO₁₂. The Ca/Y site has a distorted coordination octa­hedron of O atoms, with Ca/Y—O distances ranging from 2.227 (3) to 2.350 (3) Å, while the octa­hedra of O atoms that coordinate to the Sn and Y/Sn sites are nearly regular, with an Sn—O distance of 2.066 (2) Å and a Y/Sn—O distance of 2.147 (3) Å.     

A stereochemical investigation of 2-methyl- and 2,5-dimethyl-3-phenyl-1,3-oxazolidines using NMR

The stereochemical properties of two 2-methyl-3-phenyl-1,3-oxazolidines and two of its 5-methyl substituted and four of its 2,5-dimethyl substituted derivatives have been investigated by pmr and cmr methods. The compounds of 2,5-dimethyl-3-phenyl-1,3-oxazolidines exist in isomeric cis and trans forms at the two methyl groups on the heterocyclic ring.     

Iron-metal multilayers studied by Mössbauer spectroscopy,RBS and X-ray diffraction

Fe/M (M = Ag, Zn and Sn) multilayers prepared by a vacuum evaporation method are studied by Mössbauer spectroscopy (MS), Rutherford backscattering spectroscopy (RBS) and X-ray diffraction (XRD). For the case of an M = Ag multilayer, MS reveals that Fe in the multilayer remains as an-phase down to the layer thickness of 10 nm. This result is in agreement with the RBS result that Fe and Ag form a completely discrete layer structure without any mutual mixing. For the case of M = Zn and Sn, RBS reveals that a considerable mixing has taken place between Fe and Sn during the specimen preparation. MS on Fe/Sn specimens with different layer thickness shows that an alloy phase of about 5 nm thickness is formed at the interface. Structural as well as magnetic properties of the alloy phase are discussed based on MS at different temperatures and on reported results of the intermetallic compound FeSn.